CNC Shapes - Joint Designer
===========================

A VCarve Pro / Aspire gadget - the Joint Designer designer from
https://cnc.blueeyedcat.com as native parametric vectors in your job.

Install: Gadgets menu -> Install New Gadget... -> pick the .vgadget file
(or double-click it). It appears in the Gadgets menu as "CNC Shapes Joint Designer".

Use: open a job and run the gadget. All sizes are in the job's units, and
the geometry lands on one layer per element group so you can assign a
toolpath to each part. Settings are remembered between runs.

Load a design from the website: design it on the site, click
"Copy share link", paste the link into the field at the top of the gadget
dialog and click OK - the fields fill in from the link so you can check
them, then OK again draws it.

Generated from gadgets-src/ in the AI-CNC repo - do not edit by hand.
